Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: DH6DAB (0x444836444142), rev: 0x02, serial number: 0xC0966AAF
Manufacturing date: Dec 2018
CID: 15010044 48364441 4202C096 6AAFC5A4
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
Firmware version: 0x08
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 16 MiB [Provisioned, counter: 356259]
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Secure Feature support: 0x55
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
ANDROID System Info:
platform: sdm660, cpu abi: arm64-v8a
manufacturer: OPPO
board: sdm660, name: CPH1893
brand: OPPO, model: CPH1893
build model list: CPH1893, CPH1893
build id: PKQ1.190414.001, version: 9 [Pie] (CPH1893EX_11_C.44)
build description: sdm660_64-user 9 PKQ1.190414.001 eng.root.20210702.175920 release-keys
crypto state: encrypted?
eMMC selected: [SAMSUNG] KMDH6001DA-B422/64GB (BGA254)
