OPPO Qcomm Dynamic FRP Remove

mobilewo

Super Moderator
Staff member
Messages
599
Reaction score
20
Points
18
Added a new FRP Remove solution for OPPO phones with Qualcomm SoCs. It's available from EDL mode.

We can't provide an exact supported model list, because it's a generic solution which utilises a custom feature of the Qualcomm programmers.
Based on our current programmer database we've collected a list of the supported SoCs below. Please note: this solution might not work on every device that is equipped with the listed SoCs.
  • Qualcomm Snapdragon 450
  • Qualcomm Snapdragon 460
  • Qualcomm Snapdragon 662
  • Qualcomm Snapdragon 680 4G
  • Qualcomm Snapdragon 720G
  • Qualcomm Snapdragon 750G
  • Qualcomm Snapdragon 765G
  • Qualcomm Snapdragon 865
  • Qualcomm Snapdragon 888

The new solution uses Oppo programmers from the official firmware packs, which are named like "prog_firehose_ddr_fwupdate.elf". If Chimera can't provide you a suitable programmer you can look inside a firmware pack and pick one manually. You can use Chimera's own Firmware Extractor (Utility) for this. Be aware that the procedure can take a long time to execute (10-15 minutes) and removing the phone during the process will make the phone unable to boot. This long process usually happens only once on a device.

You're welcome to post your experience and results in this thread. Please also share the model names for every successful procedure!

Software version: 34.41.1114
Release date: 2 January 2023

Chimera-GSMHosting-Signature-v3-2x.png



Visit our Webshop: https://chimeratool.com
 
Activity
So far there's no one here
Back
Top