Results 1 to 2 of 2

Apple Iphone Code

This is a discussion on Apple Iphone Code within the apple Repairing area forums, part of the Apple IPhone category; Apple Iphone Code Apple Iphone Codes *3001#12345# and tap Call. Enter field mode Field mode reveals many of the inner ...

  1. #1
    ..:sunil:..'s Avatar
    ..:sunil:.. is offline Super Moderator
    Join Date
    Apr 2009
    Location
    GFCFORUM
    Posts
    3,253

    Default Apple Iphone Code

    Apple Iphone Code


    Apple Iphone Codes

    *3001#12345# and tap Call. Enter field mode
    Field mode reveals many of the inner settings of your iphone
    specially up-to-date network and cell information

    *#06#
    Displays IMEI. No need to tap call
    IMEI is the unique identifier for your cell phone hardware
    together with your SIM information it identifies you to the
    provider network

    *777# and tap Call. Account balance for prepaid iPhone

    *225# and tap Call. Bill Balance. (Postpaid only)

    *646#
    and tap Call. Check minutes. (Postpaid only)
    These three are pretty self explanatory

    *#21# and tap call. Setting interrogation for call forwards.
    Discover the settings for your call forwarding. You'll see whether
    you have voice, data, fax, sms, sync, async, packet access, and
    pad access call forwarding enabled or disabled.

    *#30# and tap Call. Calling line presentation check.
    This displays whether you have enabled or disabled the presentation
    of the calling line, presumably the number of the party placing the call.

    *&76#
    and tap Call. Check whether the connected line presentation is enabled or not.
    State whether the connected line presentation is enabled or disabled. Presumably similiar to the calling line presentation.

    *#43# and tap Call. Determine if call waiting is enabled
    Displays call waiting status for voice, data, fax, sms, sync data, async data,
    packet access and pad access. Each item is either enabled or disabled.

    *#61# and tap Call. Check the number for unanswered calls.
    Sho the number for voice call forwarding when a call is answered. Also show
    the options for data, fax, sms, sync, async, packet access and pad access

    *#62# and tap Call. Check the number for call forwarding if no service is available.
    Just like the previous, except for no-service rather than no-answer situations.

    *#67#
    and tap Call. Check the number for call forwarding when the iPhone is busy.
    And again, but for when the iPhone is busy.

    *#33# and tap Call. Check for call control bars
    Reply With Quote
    Here you will find all GSM-Codes/Secret-Code, for the iPhone are relevant.

    *#06# Displays your IMEI on your iPhone.
    *3001#12345#* To get your access to the field test mode of iPhone.
    *#30# Thus, you can check whether the caller identification (Clip-function) in the iPhone is active.

    *#43# Call Waiting Status
    *43# Activate a waiting
    #43# Deactivate waiting

    Change PIN1: **04* old PIN * new PIN * new PIN #
    Change PIN2: **042*old PIN * new PIN * new PIN #

    *#746025625#
    SIM Clock Stop Mode
    Whether your SIM card the SIM Clock Stop mode supported, you can find out with this code. The iPhone will then idle at the SIM card, ie no calls, etc., all activities on the SIM card. This has a positive effect on power consumption and prolongs battery life.

    *3370#
    EFR mode
    Enhanced Full Rate improves voice quality, but slightly reduced battery life.
    #3370# ERF OFF mode

    *4720#
    Half Rate (HFR) on
    Opposite of ERA.
    #4720# Half Rate (HFR) off

    *21# Call divert a
    #21# Call divert from
    **21* destination number # number programmed
    ###21 deletes the call transfer is complete.

    *#21# Call Forwarding Overview

    **61* destination number ** (Time 5 to 30 seconds) # divert after 5 to 30 seconds to ring
    *61# Activate divert
    #61# Call divert Disabled
    ##61# Deletes Diversion
    *#61# Call divert status

    Your Ad Here

    **62* destination number # redirection in unattainability
    *62# Turning
    #62# Off
    ##62# Clear
    *#62# Status

    **67* destination number # for Divert if busy
    *67# Turning
    #67# Off
    ##67# Clear
    *#67# Status

    *31# phone number is transmitted
    #31# phone number is not transmitted


    *#5005*86#
    Are you the code, it displays the current mailbox settings.
    *5005*86*# xxxxx Combox mail button on the available
    (xxxxx = mailbox number)

    *646# minutes consumption control

    *135# Display Own Phone Number

    *33*
    barring code # Outgoing calls to block the lock code to inquire about her please contact your network operator.
    *#33 Unlock
    *#33# Status


    *331* barring code # Outgoing calls abroad to block the lock code to inquire about her please contact your network operator.
    #331* barring code # lift blockade
    *#331# status

    *#5005*7672#
    SMS- center check
    Current number of the SMS Center (SMSC) to find out. Each SMSC according to variable cost

    *5005*7672*xxxxxxx # SMS Center reactivate
    (xxxxxxx = SMS center number)


  2. Mobile Tv Elite - Cell Phone, Tablet And Ipad App! (view mobile) Click Here!
  3. #2
    desozapeaterr is offline Junior Member
    Join Date
    Nov 2009
    Posts
    3

    Default

    If we see another iPhone in the next few months year what new features would you like it to include? I'd like to see a better battery and ability (native to the OS) to store files on the HD with bluetooth.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •